-
2,000 rpm - light wheelspin, no bog here!
Kind of preferred it though haha
-
-
3,000 rpm - starting to feel the power
Yea and you found hum the same way I did by looking up redline distributors. I said I had a full qt of diff oil you did not have to buy that.
-
-
3,000 rpm - starting to feel the power
Are you planning on doing turret as well ?
-
-
Super Moderator
James, did eclipse ever get back to you?
-
-
3,000 rpm - starting to feel the power
Nope I even called them. I also called a local shop who told me they have a method to making a radio stay in any sleeve and to just bring radio to them and they will help me out for 15 bucks max
-
-
3,000 rpm - starting to feel the power
They might have an eclipse sleeve but they are not marked so you just have to go through their pile.
-
-
2,000 rpm - light wheelspin, no bog here!
Well I didn't exactly recall that but oh well and yes I'm planning on doing the turret also
-
-
3,000 rpm - starting to feel the power
Do you know the condition of your boots ?
-
-
3,000 rpm - starting to feel the power
My brother has both an upper and lower boot along with turret rebuild kit. But it was purchased for a 2000 miata might be different.
-
-
2,000 rpm - light wheelspin, no bog here!
I know mine are torn since I tried to fix my radio before but that might have to wait. Not hard or anything but maybe more convenient when doing the turret
-
-
3,000 rpm - starting to feel the power
Eclipse just called me back with a part number and a place to call but I thought I allready called the place atleast now I have a part number.
-
-
2,000 rpm - light wheelspin, no bog here!
Alright. I just filled up my miata with oil yesterday so the leak is pretty bad again. Petty certain it is my head gasket since it gets worse with the more oil I have. My parents are tired of the drips so they are making me find a mechanic to fix it. I don't necessary want that but my parents are offering to pay. I want to know of you guys have any shops that you go to. I saw the sticky and bummer said a shop and might go there but want some more opinions. Also should I get other seals done while they are doing the head gasket
-
-
Does your coolant look like a milkshake or have oil floating on top? Check the radiator cap and overflow tank for this (while cool).
I still bet it is one of the front seals or common leaks.
The place I go to is Performance Chassis in Cary, but I know there are Miata specialty shop in the RDU area, just can't remember them.
If the head is warped and you are having the timing belt, seals, and water pump done at a shop, it's going to be pricey.
-
-
3,000 rpm - starting to feel the power
At the meet this weekend can get it on a lift and see if the leak can be found under the car as well.
-
-
Is this engine supercharged?
-
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules