I've been trying to figure out what is wrong with my engine.
Runs on 3 cylinders. When I pull the lead from second cylinder, nothing happens.
Spark plug is soaked in gas, so fuel is ok. Spark plug gives spark when pulled out and tested against ground while cranking.
Compression is ok on all 4 (145, 145, 159, 159 psi).
Tried changing sparkplugs, leads, nothing.
Tried switching the leads on the first coil (NB 1.6 engine, coil is basicaly the same as NA6 one) that operates cylinders no. 2 and 3 (should IMO move the problem to the 3rd cylinder and the engine should run since it's on wasted spark) but problem is still on second cylinder.
Any ideas?
1998 NB 1.6, MSII