Yup, I'm stupid, but I will get it sorted soon.
Installed a new hood strut...
NCGreasemonkey (12-14-2015),Paul B (12-13-2015)
Front lip is a Garage Vary, rear lip is r-pkg, and side skirts seem to be some Feed style ones.
larrybirks (12-13-2015)
And the black thingys are TSIs
(Turn Signal Intakes)
larrybirks (12-13-2015),WASABI (12-13-2015)
Wow, really? It's really well made, then, it looks (to me at least) like the real thing.
Knocked this one out a few days ago. Every time I would wash my car I would end up with a nice puddle in my trunk. No bueno! Also fixed my panel gap.
I added a few screws to better seal the gasket type thing. I then cut a trash bag in the shape of the OEM gaskets and punched a hole into it. That way when I put the lights back in it'll stretch over the lights and seal it nicely! I threw another screw in that goes threw the panel and into the gasket. That way it pulls the panel into the body and seals the edges. I don't use the 3m tape on the edges because I'm scared that I may break the panel when removing it.
^ That's probably not going to solve your problem. This will
http://mazdaroadster.net/showthread....l=1#post148230
Also removed the GV rep and test fitted the new lip and drilled the mounting holes so I can drop it off for paint.
Lip fits perfectly. Held it self on there while up in the air for about an hour.
Cool! Excited to see the end result!
'9 3 B R G
Jazz now has an Integral Kobe exhaust! I actually installed this a couple of months ago (Jazz' thread will be updated some time before the end of the year. Jazz and I have some exciting updates and upcoming changes!
Previous Jackson Racing exhaust:
Current Jet's Integral Kobe N1 Spec Ver.3 Type-R Catback
My Eunos Roadster, Jazz