Norman, calm down buddy. I posted a garage link and thought people would explore.
Norman, calm down buddy. I posted a garage link and thought people would explore.
this was a great little experience for me anyway. this is the most ive done as far as maintenance to my miata in the short time ive had it.
hopefully i will be able to get some of the other stuff done soon as well. one step at a time
Classic RED 90'
cowabunga dudes!
NA trans or NB?
Rebuilding the shifter is pretty easy, just lay out the parts as you take them off.
If you are rebuilding the shifter on an NB, I DO NOT suggest using a metal shifter bushing at the bottom.
There was one in one of the 949 racecars and we needed to use a tap to get it out. For a few moments, I thought the whole trans was going to need to be pulled to get it out.
Mazda dealer. Rebuilding an NA shifter requires a few more parts. There are three plastic bushimgs in the shift lever.
There are two plastic 'cups' and a wave washer on top. You have to remove the top cover on the shifter turret to remove one of them. You will need to re-seal it with RTV. Of course there is also the upper and lower boot, too.
People RTV the shifter turret?
I thought there was a cork gasket there to do just that...