Does the NB soft top include the frame?
Hey Miguel. What is the low-ball offer on the flywheel? if you still have it. Would have to be shipped this time. Old man cannot make the ATL. run for just one part.
Update.
Engine (pending)-has 1300 miles since I rebuilt it-
$1000 delivered within an hour range from me.
-99head And intake manifold with stock nb header.
-94-95 4pin coilpack
-94-95 alternator.
-94-97 cas
-valve cover to oil pan.
-spark plug wires.
-revG coolant reroute
-new sensors
-new head gasket and associated seals
-new water pump and timing belt
-heater core hoses
-upper and lower one piece radiator hoses.
HKS muffler - $400
-included midpipe(has damage at a hanger where it ripped open the pipe slightly reds rewelding shut), NA cat, and test pipe
Mazdaspeed header -$400
-this is for an NB ONLY
-NB soft top on frame with glass window -$300
-fidanza lightweight flywheel (either 8lb or 10lb need to verify)
-$250
-rare center console from japan
-$275
Clutch and pressure plate with about 4K -$80
Sent you a PM but it kicked back saying your inbox is full.
'00 SE, intercooled BRP MP62, Reverant MS2, Ohlins DFV, Konig Flatout (now X 2)
__________________________________________________ ____________
This ain't no build thread!
Ok Chief. Are you after the same as me? Don't want to bid war with you!
Miguel is a good guy. I picked up a 1/2 a bed load in the Workhorse on my ATL. run from him. Plus some stashed in the cab.
Bump
Mazdaspeed header SOLD
chiefmg (06-17-2016)
Bump for a great seller. Buy this man's stuff!