Paul B (07-07-2017)
Charley, here is the custom map light mod.
http://mazdaroadster.net/showthread....370#post171370
You can also gain footwell lights by using those cheap LED strip lights from Autozone, wire them to the switch on the driver's side switch.
Grumpy (07-07-2017)
Thanks to Steve, interior lighting accomplished! Months ago I had ordered the same led bolts he used, but had planned to use them in the visor mounts(I removed the visors from the mounts) now I can use the other lights I have for trunk lighting. Posssibly one under the hood too!
BRGNA8 (07-18-2017),kung fu jesus (07-17-2017)
About 2 years ago i got a set of the Flyin' Miata frame rails. yesterday, got some help and finally did the install. When I got them, they had no hardware so I called up FM and had them ship me some. It wasn't till we did the install that I realized they didn't send me any short bolts for the inboard passenger side (where the fuel/brake lines are). we ended up measuring and shortening the bolts we had for that side. once we got the passenger side in, we went and measured and drilled the first hole for drivers side. Strangely, from the interior it looked like it was further back, based on placement of the hole to the body rail that went across the car (where the front of the seat rail bolts in. I was worried due to the closeness of the rear bolt to the bulkhead. but we discovered that all was good, and got the car buttoned up. Car definately feels more solid over things like RR tracks. Have yet to try it out on twisties tho!
"Have yet to try it out on twisties tho!"
You need to test them out on Ohio 555 heading south out of Zanesville.
Love driving that!
Return of the Manticore build: http://mazdaroadster.net/showthread....-4-engine-swap
Last edited by Grumpy; 07-23-2017 at 07:22 PM.
Before and after shots, got new Cibie headlights with osram h4s. I wasn't real happy with light output last year at the dragon, so thought I'd try something different.
Sent from my SM-G950U using Tapatalk
Greasemonkey2000 (07-27-2017),JamieH (07-27-2017),MiataQuest (07-27-2017)
Temporary banner until the car gets painted. Thanks to Scott at Spinnywhoosh! Great to meet him at MATG XXI.
Last edited by Grumpy; 08-13-2017 at 05:58 PM.
Spent the day searching the internet for the best price on parts. Planning on having the engine out this winter for paint, so all hoses and several gaskets will be replaced, as well as the clutch and belts/timing stuff/water pump. Also doing the motor mounts. My thanks to Steve (KFJ) for the prodding and help. I'm managed to chop almost $120 from my intial collection of parts. from 600 to about 480. Still more than Id like, but such is life. Now if only I could find a place locally to paint the car cheaper than 4100 bucks, I'd be a bit better off
HarryB (11-12-2017),kung fu jesus (03-08-2018),MiataQuest (11-12-2017)
ordered the last of the parts today... I've wound up spending lots more than I'd planned. up to $650 or so and still have to buy the fluids. I wound up adding a clutch, and the clutch master and slave to all the hoses and gaskets I'd planned on replacing. Plans are for engine to come out mid february, engine bay painted concurrently. Weirdly I'm actually leaning to the interior green the navy used for maintenance spaces. I figure I'm doing it myself, so if I did it in grey, it wouldn't match the exterior anyway, so why not stick with the period correct option. Exterior Paint will hopefully follow in late february/early march.
HarryB (01-29-2018),kung fu jesus (01-30-2018)
Do you mean zinc chromate? That would be cool. Another thing to look at is aircraft fluid line identification tape. I can't remember the exact name, but it goes around tubing to indicate which system it is (fuel, hydraulics, nitrogen, oxygen, etc).
Agent☣Orange (02-01-2018),Grumpy (01-29-2018)
It's done.... on Forza anyway... LOL
Last edited by Grumpy; 07-29-2018 at 12:05 AM.
kung fu jesus (02-12-2018),tsingson (02-13-2018)
Here's another detail to look at doing. I was Air Force and was on the C-130 platform (mainly AC, MC and HC models). On the nose wheel we would mark one wheel with each crew position equally spaced on the edge of the rim (think wheel of chance). When we landed we'd see what position was closest to the ground. That person bought the first round. You could do 4 points marking 2 as pilot and 2 as navigator.