20170818_204543 by Bryan Wyatt, on Flickr
(That headlight came apart in pieces...total goner. Oddly, all three bulbs survived intact.)
Looks as if the bushing deformed, but I think the subframe is actually fine. Have to take off the A-arm (or at least the alignment bolts) to know for sure.
20170818_204629 by Bryan Wyatt, on Flickr
20170818_205107 by Bryan Wyatt, on Flickr
20170818_205122 by Bryan Wyatt, on Flickr
Surprisingly little if any damage to the bumper core support:
20170818_205246 by Bryan Wyatt, on Flickr
20170818_205154 by Bryan Wyatt, on Flickr
20170818_205138 by Bryan Wyatt, on Flickr
Got the bumper and the good headlight off:
20170831_233001 by Bryan Wyatt, on Flickr
Here's what the good corner looks like:
20170831_232539 by Bryan Wyatt, on Flickr
20170831_232550 by Bryan Wyatt, on Flickr
20170831_233016 by Bryan Wyatt, on Flickr
Compare to the damaged corner:
20170831_233029 by Bryan Wyatt, on Flickr
20170831_232838 by Bryan Wyatt, on Flickr
This seems to be the extent of the damage.
While the nose of the apron panel should be able to be straightened, I'm not sure about getting the bottom end of that headlight mount straightened back out (and it'd have to be to get the little retainer rod on the back of the headlight to sit correctly in its receptacle).
Next thing to come off: the driver's side fender and the bumper cap.