This brings us to last month. I was able to set up the car in time for HPDE with NASA at CMP.
Ride height needed to be readjusted after the spring change, and I landed on the following specs:
F: ~4.125"
R: ~4.25"
Alignment remained very similar to what I had before. I do need extended ball joints though.
Front Camber: -2.5
Front Caster: 3.8
Front Toe: 0
Rear Camber: -2.5
Rear Toe: 0.2
I didn't have a seat yet, so I managed to borrow a Sparco Sprint from a friend.