I'm always looking at how I can get a little lower. I could gut my stock seat some more, but I'm a bit leery of the height of the seatbelt receptacle relative to my hips.
I'm always looking at how I can get a little lower. I could gut my stock seat some more, but I'm a bit leery of the height of the seatbelt receptacle relative to my hips.
Originally Posted by DazedAndConfused
07-13-23: I installed the custom DCBE Tech center caps with custom Revlimiter inserts a few days ago but hadn't taken any pictures so Misfire and I went out and took a few pictures.
'01 NB2 aka MisF1re: http://mazdaroadster.net/showthread....218#post207218
'97 M aka Warbird, gone but not forgotten: http://mazdaroadster.net/showthread....B&goto=newpost
Instagram: @greasemonkey2000
07-21-23: When I covered the air intake box with the reflective tape, I saw that the UNI filter needed to be replaced. I had cleaned it a few times but the outer sock was starting to rip.
It is REALLY hard to find a filter in a size that will fit in the area that the filter goes in, the UNI filter is 3" inlet and is 4" diameter and about 4.5" total length, IIRC. I found a K&N filter, part #RB0910, which is about 1" longer total length. Well that is too long for that area but I made it work.
My plan is to use some elbows to put the filter in an area with a bit more room or get one that fits in the area. Besides getting a nice, clean filter...I was pleased to hear the supercharger more which I really like. This has been my experience in the past, the cotton/metal mesh filters create a much more distinct intake sound vs foam filters.
'01 NB2 aka MisF1re: http://mazdaroadster.net/showthread....218#post207218
'97 M aka Warbird, gone but not forgotten: http://mazdaroadster.net/showthread....B&goto=newpost
Instagram: @greasemonkey2000
HarryB (09-05-2023)