I have been talking to Rod from Tetsuya Garage about sourcing some parts for me. My funds have been completely depleted because of this. First thing was the OEM fogs. Rod had a set complete with harness/relay and switch. Couldn't help but to pick these up.
These install a little differently on USDM cars since the drivers side is on the left. The relay and ground was mounted on the left side close to the relocated cruise control assembly.
Miaka did not have the harness for the foglights just the unused bullet connector that powers the switch in the interior. Redid the bullet connector and installed switch in the interior.
Power was tapped from the fuse box. 30 amp fuse in to the ABS (my car has no ABS)
And now we have light!