after two months of waiting for the crotch strap portion for a 5pt. Takata harness conversion, install pix for reference
Since I fabricated a custom seat bracket, I welded the nut that came with the eyebolt under the rear brace of the bracket instead of drilling a hole on the flooring just what like everyone suggests.
2012-06-28-125 by marlonmercado77, on Flickr
2012-06-28-123 by marlonmercado77, on Flickr
2012-06-28-126 by marlonmercado77, on Flickr
The position of the eyebolt is about 4"-5" away from where the hole on the bucket seat, notice the white line, that's the center of the hole of the bucket seat. This position gives me just about the right length for the crotch strap when fastened to the harness buckle.
2012-06-28-127 by marlonmercado77, on Flickr
2012-06-28-128 by marlonmercado77, on Flickr
2012-06-29-130 by marlonmercado77, on Flickr
2012-06-29-133 by marlonmercado77, on Flickr
The harness that I got was specifically for a two seater (part no. MPH341w) so length of the shoulder harness was not an issue
2012-06-29-134 by marlonmercado77, on Flickr
the installation of the side harnesses were pretty basic, the right eyebolt bolted to where the OEM seatbelt buckle was originally placed
2012-06-29-135 by marlonmercado77, on Flickr
and the left eyebolt bolted to where the OEM seatbelt is likewise placed.
2012-06-29-137 by marlonmercado77, on Flickr
2012-06-29-132 by marlonmercado77, on Flickr