949racing Xida extra height bushings.

[xjdesertfox]

I will ask Emilio tomorrow to give a price on the bushings.

Also, I would suggest not adding bushings to the front shocks. Since you want 4-4.25" ride height in the front and 4.25-4.5" in the rear, the fronts do not require very much preload to achieve that goal. Of course I assume you have a 2300-2400lb car with driver. Adding bushings in the front will only take a bump travel. Also the droop travel in the front should be sufficient.

Perfect. Yep i was just gonna add them to the rears. And thats about the height ill be raising my car up to.

[★ 949 Racing ★]

Perfect. Yep i was just gonna add them to the rears. And thats about the height ill be raising my car up to.

The helpers must be bound when at static ride height in order to work properly. You do not want the helpers active when the car is at rest.
They should only become active when the damper is near full droop.

We are now recommending all installation use the double stacked lower bushings but that is simply for increased droop travel.

Just send us an email and we'll get you some bushings.

[xjdesertfox]

The helpers must be bound when at static ride height in order to work properly. You do not want the helpers active when the car is at rest.
They should only become active when the damper is near full droop.

We are now recommending all installation use the double stacked lower bushings but that is simply for increased droop travel.

Just send us an email and we'll get you some bushings.

Yep, got it emilio ;) Shooting an email your way! Thanks.