-
Idling - Listen to it purr...
I think I've found the oil leakage
The CAS and the valve cover. Here my proof
image.jpg
image.jpg
Napa will see me in the Morning
-
-
2,000 rpm - light wheelspin, no bog here!
Before I went to COPs I was replacing this "O" ring once a year.
I eventually found the ones made of Viton at McMasters http://www.mcmaster.com/#o-rings/=10weqj5
Sorry I forget the actual size. But they NEVER leaked again. Had to buy a pack but only used 1. They make great gifts to those in need
Last edited by 90blue; 01-30-2016 at 07:50 PM.
Peter
-
-
Idling - Listen to it purr...
CAS o-ring is a dealer item where the valve cover gasket they want $53 but auto part shop only want $23... 90Plus if you remember that size I'll be set
-
-
2,000 rpm - light wheelspin, no bog here!
-
-
4,000 rpm - entering the fun zone
go to a local hydraulic store with your CAS. ask for a Viton o-ring. they have all the sizes avaiables. order one for 4-5 bucks problem solved.
FYI, I did this mod in my VVT solenoid a while back, for reference see my build thread.
-
-
Idling - Listen to it purr...
Successful Saturday
image.jpg
$2 at auto zone
image.jpg
Thanks for the guidance guys
-
The Following User Says Thank You to tazman34685 For This Useful Post:
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules